FTX Outback Mini XP 1:18 Evo Van Trail RTR - Metal Grey

In Stock : Order within 22 hrs 34 mins for delivery by Tuesday, 24th December (UK Mainland)


£134.99
SAVE: £19.00
£115.99

In Stock : Order within 22 hrs 34 mins for delivery by Tuesday, 24th December (UK Mainland)

Safe & Secure Checkout

SKU: FTX5483MG

Material Code: FTX5483MG

Brand: FTX

FTX Outback Mini XP 1:18 Evo Van Trail RTR - Metal Grey

Experience the features typically seen on larger 1/10 scale crawlers with FTX's newest 1/18th Outback XP, with EVO specs. The EVO is a perfect example of how being small doesn't have to mean sacrificing features; it has a 2-speed servo gearbox that allows for both fast and low speed crawling. The EVO can crawl extremely slowly thanks to a revised final drive ratio, and a new 130 size 100T motor offers the highest torque. When you're on level ground, go into second gear for faster straight-line speed. With fully internal metal gears, you can upgrade to a 180, 240, or 270-size motor in the future without experiencing any sleep loss. Reversing the rear driveshaft's rotation in the gearbox also reduces chassis torque twist.

The redesign of the weight bias pushes the weight lower and farther front, improving crawling efficiency. Naturally, the front and rear portal axles offer exceptional clearance over obstructions.

Select from three incredibly realistic painted lexan bodies, each with moulded scale accessories and LED lights: the Rock Van, Texan pickup, or Unitrak utility vehicle. Each body is 1.2 mm thick.

There is nothing better than an FTX Outback Mini XP EVO for small-scale crawling!
 

  • Front and Rear High Clearance Portal Axles
  • Heavy duty metal gears in front and rear axles
  • 2-Speed Transmission Gearbox w/Metal Gears
  • Clipless body mounting on Van and Unitrack
  • New 4 channel ESC/RX with super smooth low speed throttle response
  • Full function light system controlled by TX (body types may differ)
  • Oversize internal bead lock wheel (1.2”)
  • Oversize All Terrain tyre (1.2”)
  • Oversize 130 Brushed Motor
  • Chassis mounted servo with panhard bar
  • LCG Weight Bias with Front Mounted Motor
  • High torque transmission (FDR: 1st Gear 98:1, 2nd Gear 24.5:1)
  • PPX 4 standard water-resistant electronics
  • Aluminum rail chassis
  • 1.2mm thick painted lexan body w/clear windows
  • Tight turning radius of 80cm
  • Large steering angle up to 45 degrees
  • Extended run times of up to 45 minutes
  • 7.4V 2S 600 mAh Li-Po battery & USB Charger

0.0

Average Rating

0%
0%
0%
0%
0%

Submit Your Review

Your email address will not be published. Required fields are marked *

1 2 3 4 5