Futaba 6K 8-channel Air Radio with R3008SB Rx Mode 2

Futaba 6K 8-channel Air Radio with R3008SB Rx Mode 2

Please note this order is available for 2-3 day shipping.

The T6K now comes with the R3008SB receiver and can operate up to 8 channels thanks to the most recent V3.0 software update.

What else is the V3S version updated with?

For glider models without a motor, the T6K-V3S provides an extra aileron mix that operates on channels 1 and 3. It is now possible to code up to four different flight conditions for gliders. The rudder is now part of the trim mixer. There are now two separate timers and stopwatches available. Many governor functions can be altered directly from the transmitter in the Helicopter Menu, and the top right toggle button has been changed to a three position switch.

The Futaba T6K is the ideal radio for pilots of aircraft and helicopters as an entry-level or sport model. This elegant and covert transmitter has a clear and simple display. 

Although the T6K has an integrated aerial, simple jog dial programming, and a backlit LCD screen for user convenience, it also has many other capabilities that you would often see in high-end transmitters.

Specifically engineered to optimise Futaba's well-known T-FHSS telemetry system, a plethora of information can be tracked during flight (via the built-in speaker or on the screen). This information includes standard receiver battery voltage and external battery voltage, with additional options for temperature, RPM, altitude, and even variometer sensors. Additionally, the T6K can employ S.Bus/S.Bus2 servos, which are readily programmed using the transmitter; normal servos and these can be used with the included R3008SB receiver.

• S-FHSS/T-FHSS selectable
• Telemetry system (T-FHSS) with data speech function for monitoring receiver battery voltage, external voltage, temperature, RPM, altitude and variometer
• Built-in antenna
• S.Bus/S.Bus2 servo setting functions programmable through the transmitter
• Preset vibration alarms
• 30 model memory
• 8-character model/user naming
• Programmable mixes for airplanes, helicopters, gliders and multi-rotors
• Digital trims with variable step settings
• Adjustable stick length and tension
• Changeable switch/VR position and AUX channel function
• Throttle position warning
• Backlit 128x64 DOT LCD screen with adjustable display contrast
• Software updateable through the CIU-2
• Screen Lock
• Earphone/S.Bus/Trainer jacks
• Assignable switches (three 3-position, one 2-position)
• Range Check
• Program navigation bay with jog dial, +/- pads and end pad
• Data reset
• Model copy
• Selectable model type
• Fail Safe
• End Points
• Trim/Trim Resets/Trim Steps
• Sub Trim
• Servo Reversing
• Parameter functions
• Servo monitor/Test
• Wireless model data transfer
• Timer-System and Model (Up/Down)
• Trainer system

Airplane Functions
• Wing Type (5-wing, 2-tail)
• Throttle Cut
• Dual Rate/Expo
• Throttle Curve
• Idle down
• Gyro
• Aileron differential
• V-Tail
• Camber
• Air Brake
• Elevator-to-Flap mixing
• Flap-to-Elevator mixing
• Elevon mixing

Glider Functions
• Wing Type (5-Wing, 2-Tail)
• Condition select
• Dual Rate/Expo
• Motor switch
• Gyro
• Aileron Differential
• V-tail
• Butterfly mixing
• Trim mixing
• Elevator-to-Camber mixing
• Camber mixing
• Aileron-to-Camber mixing

Helicopter Functions
• Swash type (6)
• Condition Select
• Throttle Cut
• Dual Rate/Expo
• Trim Offset
• Delay
• Gyro mixing
• Swash AFR
• Swash mixing
• Throttle Curve (5-point)
• Pitch Curve (5-point)
• Pitch-to-Rudder mixing
• Throttle Hold
• Hovering throttle
• Hovering pitch

Multicopter Functions
• Flight Mode
• Center alarm
• Dual Rate/Expo
• Throttle Curve
• Throttle Delay
• Gyro