Edge Front / Step Pin Rear Tires Mounted 7mm White (4): Losi

Available to Back Order Due back in stock: Wednesday, 4th November


£19.99
Save: £2.00
£17.99

Available to Back Order Due back in stock: Wednesday, 4th November

Backorder
Safe & Secure Checkout

SKU: G-PRO1035113

Material Code: G-PRO1035113

Brand: Pro-line Racing

Pro-Line Edge Front Tires Mounted on 7mm Hex Wheels Introduction

The Edge fronts provide confident steering, while the Step Pin rears dig in when you hit the throttle. This complete set includes two front and two rear tires pre mounted on 7mm hex wheels, so there is no gluing or extra prep required. Choose between white or classic racing yellow wheels, bolt them on, and turn any backyard, park, or patch of dirt into your next Micro T playground.

Edge Front Tread Pattern for the Pro-Line Edge Front Tires Mounted on 7mm Hex Wheels
Edge Front Tread Pattern

The Edge front tires use a steering-focused ribbed tread that cuts through loose dirt and helps the Micro-T hold its line. The directional design provides consistent front-end response, allowing drivers to place the truck accurately when entering and moving through corners.

Step Pin Rear Tread Pattern for the Pro-Line Edge Front Tires Mounted on 7mm Hex Wheels
Step Pin Rear Tread Pattern

The Step Pin rear tires use multiple rows of raised pins to engage the track surface and put power to the ground. This traction-focused pattern helps the Micro-T hook up under acceleration, maintain momentum, and drive hard out of corners.

Front and Rear-Specific Setup for the Pro-Line Edge Front Tires Mounted on 7mm Hex Wheels
Front and Rear-Specific Setup

This set uses two different tread patterns instead of placing the same tire at all four corners. The Edge fronts manage steering and directional control, while the Step Pin rears focus on forward drive. The result is a balanced dirt setup designed specifically around the demands of a 2WD truck.

Pre-Mounted 7mm Hex Wheels for the Pro-Line Edge Front Tires Mounted on 7mm Hex Wheels
Pre-Mounted 7mm Hex Wheels

Each tire comes professionally mounted on a 7mm hex wheel for direct installation on the Losi Micro-T. The complete mounted set eliminates tire gluing and helps ensure the tires are properly seated and ready for use.

Complete Four-Tire Set for the Pro-Line Edge Front Tires Mounted on 7mm Hex Wheels
Complete Four-Tire Set

One package provides the complete tire setup needed for the Micro-T. Two mounted Edge front tires and two mounted Step Pin rear tires make it easy to replace all four tires at once with the intended front-to-rear combination.

0.0

Average Rating

0%
0%
0%
0%
0%

Submit Your Review

Your email address will not be published. Required fields are marked *

1 2 3 4 5