Arrma Typhon 4X4 3S BLX Firma SLT3 Speed Buggy RTR

Arrma Typhon 4X4 3S BLX Firma SLT3 Speed Buggy RTR 

It's now easier than ever to get started with brushless 1/8 scale Speed Buggy action. The 3S LiPo compatible ARRMA® TYPHONTM 4X4 3S BLX RTR is a quick, tough, and factory-built device that is prepared to take on any terrain right out of the box. An extremely durable and easy-to-maintain vehicle design with a low centre of gravity, wide arms, narrow wheels, and tyres that improve handling over race tracks, trails, muddy courses, skate parks, and more is made possible by the combination of precision aluminium, strong steel, and composite materials. The already remarkable performance and endurance of the original buggy are further enhanced by the upgraded equipment included in this version.

The TYPHONTM 4X4 3S BLX RTR is engineered to be both fast and durable, with an emphasis on extreme all-terrain durability and thrilling bashing speeds. Strengthened chassis and retained hinge pin plates; increased stone clearance in the steering; a castellated slipper pad and sliding gear mesh; and rubber-shielded bearings all contribute to its unstoppable performance.

It now comes with an SLR300 receiver and a SpektrumTM SLT3TM transmitter. The transmitter features a foam wheel for accurate fingertip control, an enhanced hand grip, and a trigger feel. It is ergonomically built to allow for extended durations of fatigue-free bashing. Tilt limitations can be adjusted to 50% or 75% for novice bashers, or until they are prepared to utilise the maximum speed. The SLT3TM provides a third channel for controlling optional features like lights and winches on models that have them, and it can be used with Tactic® SLTTM receivers to operate any RTR vehicles you may possess.

The TYPHON 4X4 3S BLX is now powered by an ARRMA® brushless system that includes the SpektrumTM FirmaTM 3200Kv brushless motor and BLX100 ESC. The torque, acceleration, and speed produced by this combo are amazing. As is customary with ARRMA, the gearbox and chassis are robustly constructed to fully utilise the power of the electronics.

ARRMA® experts have refined its clever modular architecture to make component access and maintenance simple. The motor with ARRMA® heatsink and cooling fan, along with the motor plate, slipper clutch assembly, and gear cover, make up the power module with enhanced dirt management. One screw can be removed to completely separate the power module from the chassis. Three screws holding the gear cover in place can be removed to readily access the slipper clutch for modifications once the power module has been removed. Because the power module now has a sliding motor mesh design, the gear ratio may be adjusted precisely.

The electronics module of the Speed Buggy is a two-piece moulding that is bolted to the chassis and houses the ESC tray, servo mount, and waterproof receiver box. To keep it safe from moisture and dirt, the SLR300 receiver is mounted inside the receiver box. The servo mounts to the side of the ultra-compact ESC, which is fastened to the top of the module for easy access to the on/off switch. It is simple and quick to remove all three parts at once.

Each differential unit is housed in the differential module's creative yoke design. The front and rear yokes may be released with just eight screws removed. After that, you can swivel the gearbox cases for differential access by detaching the power module. With 37T 1.35mod diffs and silicone O-rings, the TYPHONTM 4X4 3S BLX RTR is brushless ready out of the box. The internal metal gears have been selected for dependability during severe battering, and the massive gears can tolerate enormous torque.

Unlike dogbones, the robust front, rear and midline telescopic driveshafts used in its full-time 4WD gearbox won't break under severe collisions. The ultra-reliable driving system is complemented by a straightforward, trustworthy, responsive steering assembly that has an integrated servo saver and servo horn. With 15% more torque than the ADS-7M servo from the previous generation, the waterproof SpektrumTM SPMS651 metal-geared digital servo is included with the TYPHONTM 4X4 3S BLX RTR.

The oil-filled, self-bleeding shocks—which now include silicone O-rings—have a tried-and-true coil-over construction that makes for easy handling and minimal maintenance. For added durability, its unique rod-end features a spring perch that is moulded in. The quantity of dirt and debris that can enter the chassis tub is restricted by the high chassis sides and the close-fitting buggy body. Both the front and rear bumpers provide impact protection.

Effective grip for bashing on nearly any terrain is provided by the 1/8 scale TYPHONTM 4X4 3S BLX RTR Speed Buggy's durable gunmetal-colored, multi-spoke wheels with vented dBoots® 2-HOTM tyres. It looks as good as it performs, thanks to the forged composite detail and metallic-finish body. As you explore the higher reaches of its insane speed range, a sleek, high-downforce wing keeps all four wheels planted.